Label Planet
View Prices
25 Sheet Minimum Order
Paper Labels, 12 Round Labels Per Sheet, 57mm Diameter, LP12/57R
Label Templates For LP12/57R
- LP Code:
- Label Templates LP12/57R
Free Word Templates & PDF Templates for printing A4 sheets of self adhesive labels. Use the links below to download a template for your round labels; all of our label templates have been tested to ensure that they are accurate and compatible with our labels, so you can print your labels quickly, easily, and trouble free!
Information About This Label Size:
Number Across
3
Label Width
57mm (diameter)
Label Height
57mm (diameter)
Horizontal Pitch
61mm
Vertical Pitch
61mm
Number Down
4
Top Margin
28.5mm
Bottom Margin
28.5mm
Left Margin
15.5mm
Right Margin
15.5mm
Also Known As
LL57C
Download LP12/57R Label Templates:
| File Type | Description | |
|---|---|---|
| Word | LP12/57R Portrait | |
| Word | LP12/57R Bleed Portrait | |
| LP12/57R Portrait | ||
| LP12/57R Bleed Portrait |
- Circles
- Centralised Layout
- Selvedge present
- Bleed of 2mm possible
- Feed direction not indicated
- Gaps between labels (vertical and horizontal)
- Shape indicated on PDF template but NOT on Word template
Please Note:
These templates are provided in good faith for our customers to use free of charge. Customers should test the suitability of these templates for their requirements (including compatibility with their software/hardware), and are responsible for making any necessary adjustments to achieve the best possible alignment.All products are manufactured with a tolerance, which is an allowable deviation from the measurements stated on the goods (for example, an A4 sheet may have a tolerance of +/- 2mm); this tolerance can lead to slight variation in the measurements of label products and so we recommend that customers complete a test print of any template before printing onto their label products so that they may determine if the template requires any further adjustments.
^ Our labels are very close in size/layout to the alternative codes provided (to within +/- 1mm)