Label Planet
Label Templates For LP165/16R
- LP Code:
- Label Templates LP165/16R
Free Word Templates & PDF Templates for printing A4 sheets of self adhesive labels. Use the links below to download a template for your round labels; all of our label templates have been tested to ensure that they are accurate and compatible with our labels, so you can print your labels quickly, easily, and trouble free!
Information About This Label Size:
Number Across
11
Label Width
16mm (diameter)
Label Height
16mm (diameter)
Horizontal Pitch
18mm
Vertical Pitch
19mm
Number Down
15
Top Margin
7.5mm
Bottom Margin
7.5mm
Left Margin
7mm
Right Margin
7mm
Also Known As
LL16C
Download LP165/16R Label Templates:
| File Type | Description | |
|---|---|---|
| Word | LP165/16R Portrait | |
| Word | LP165/16R Bleed Portrait | |
| LP165/16R Portrait | ||
| LP165/16R Bleed Portrait |
- Circles
- Centralised Layout
- Selvedge present
- Bleed of 1mm possible
- Feed direction not indicated
- Gaps between labels (vertical and horizontal)
- Shape indicated on PDF template but NOT on Word template
- Please note that the margins for this label size – particularly when using the bleed templates – are very narrow and may fall outside the printable area of some standard printers, which will prevent the printing of borders and/or coloured backgrounds. If your printer cannot print the full area of these labels, you will need to ensure your design does not use the area that your printer cannot print.
- Please note that the narrow gaps between these labels can mean that any slight variation in the cut or inaccuracy in the positioning produced by your template or printer can cause the alignment to get very slightly worse as you go down the page. If you find that, by the end of the sheet, your template is just slightly too big or too small (i.e. the top row aligns perfectly but your template ends less than 2mm below or above the bottom edge of the bottom row) you may need to alter (some of) the gaps between the rows to manually create the correct alignment. You may also need to make a slight adjustment to the top margin to get the best possible fit.
Products Available In Template Size LP165/16R
Please Note:
These templates are provided in good faith for our customers to use free of charge. Customers should test the suitability of these templates for their requirements (including compatibility with their software/hardware), and are responsible for making any necessary adjustments to achieve the best possible alignment.All products are manufactured with a tolerance, which is an allowable deviation from the measurements stated on the goods (for example, an A4 sheet may have a tolerance of +/- 2mm); this tolerance can lead to slight variation in the measurements of label products and so we recommend that customers complete a test print of any template before printing onto their label products so that they may determine if the template requires any further adjustments.
^ Our labels are very close in size/layout to the alternative codes provided (to within +/- 1mm)