Label Planet
View Prices
25 Sheet Minimum Order
Paper Labels, 2 Round Labels Per Sheet, 114.5mm Diameter, LP2/115R
Label Templates For LP2/115R
- LP Code:
- Label Templates LP2/115R
Free Word Templates & PDF Templates for printing A4 sheets of self adhesive labels. Use the links below to download a template for your round labels; all of our label templates have been tested to ensure that they are accurate and compatible with our labels, so you can print your labels quickly, easily, and trouble free!
Information About This Label Size:
Number Across
1
Label Width
114.5mm (diameter)
Label Height
114.5mm (diameter)
Horizontal Pitch
114.5mm
Vertical Pitch
149.2mm
Number Down
2
Top Margin
16.65mm
Bottom Margin
16.65mm
Left Margin
47.75mm
Right Margin
47.75mm
Also Known As
SL115R
Download LP2/115R Label Templates:
| File Type | Description | |
|---|---|---|
| Word | LP2/115R Portrait | |
| Word | LP2/115R Bleed Portrait | |
| LP2/115R Portrait | ||
| LP2/115R Bleed Portrait |
- Circles
- Centralised layout
- Selvedge present
- Bleed of 5mm possible
- Feed direction not indicated
- Gaps between labels (vertical only)
- Shape indicated on PDF template but NOT on Word template
Products Available In Template Size LP2/115R
Please Note:
These templates are provided in good faith for our customers to use free of charge. Customers should test the suitability of these templates for their requirements (including compatibility with their software/hardware), and are responsible for making any necessary adjustments to achieve the best possible alignment.All products are manufactured with a tolerance, which is an allowable deviation from the measurements stated on the goods (for example, an A4 sheet may have a tolerance of +/- 2mm); this tolerance can lead to slight variation in the measurements of label products and so we recommend that customers complete a test print of any template before printing onto their label products so that they may determine if the template requires any further adjustments.
^ Our labels are very close in size/layout to the alternative codes provided (to within +/- 1mm)