Label Planet
Label Templates For LP2/144R
- LP Code:
- Label Templates LP2/144R
Free Word Templates & PDF Templates for printing A4 sheets of self adhesive labels. Use the links below to download a template for your round labels; all of our label templates have been tested to ensure that they are accurate and compatible with our labels, so you can print your labels quickly, easily, and trouble free!
Information About This Label Size:
Number Across
1
Label Width
144mm (diameter)
Label Height
144mm (diameter)
Horizontal Pitch
N/A (step across 54mm)
Vertical Pitch
N/A (step down 140.5mm)
Number Down
2
Top Margin
6.25mm
Bottom Margin
6.25mm
Left Margin
6mm
Right Margin
6mm
Also Known As
SL144R
Download LP2/144R Label Templates:
| File Type | Description | |
|---|---|---|
| Word | LP2/144R Portrait | |
| Word | LP2/144R Bleed Portrait | |
| LP2/144R Portrait | ||
| LP2/144R Bleed Portrait |
- Circles
- Centralised layout
- Selvedge present
- Bleed of 3mm possible
- Feed direction not indicated
- Gaps between labels (stepped)
- Shape indicated on PDF template but NOT on Word template
- Please note that the margins for this label size – particularly when using the bleed templates – are very narrow and may fall outside the printable area of some standard printers, which will prevent the printing of borders and/or coloured backgrounds. If your printer cannot print the full area of these labels, you will need to ensure your design does not use the area that your printer cannot print.
Products Available In Template Size LP2/144R
Please Note:
These templates are provided in good faith for our customers to use free of charge. Customers should test the suitability of these templates for their requirements (including compatibility with their software/hardware), and are responsible for making any necessary adjustments to achieve the best possible alignment.All products are manufactured with a tolerance, which is an allowable deviation from the measurements stated on the goods (for example, an A4 sheet may have a tolerance of +/- 2mm); this tolerance can lead to slight variation in the measurements of label products and so we recommend that customers complete a test print of any template before printing onto their label products so that they may determine if the template requires any further adjustments.
^ Our labels are very close in size/layout to the alternative codes provided (to within +/- 1mm)