Label Planet
View Prices
25 Sheet Minimum Order
Paper Labels, 20 Round Labels Per Sheet, 48mm Diameter, LP20/48R
Label Templates For LP20/48R
- LP Code:
- Label Templates LP20/48R
Free Word Templates & PDF Templates for printing A4 sheets of self adhesive labels. Use the links below to download a template for your round labels; all of our label templates have been tested to ensure that they are accurate and compatible with our labels, so you can print your labels quickly, easily, and trouble free!
Information About This Label Size:
Number Across
4
Label Width
48mm (diameter)
Label Height
48mm (diameter)
Horizontal Pitch
50mm
Vertical Pitch
51mm
Number Down
5
Top Margin
22.5mm
Bottom Margin
22.5mm
Left Margin
6mm
Right Margin
6mm
Also Known As
LL48C
Download LP20/48R Label Templates:
| File Type | Description | |
|---|---|---|
| Word | LP20/48R Portrait | |
| Word | LP20/48R Bleed Portrait | |
| LP20/48R Portrait | ||
| LP20/48R Bleed Portrait |
- Circles
- Centralised Layout
- Selvedge present
- Bleed of 1mm possible
- Feed direction not indicated
- Gaps between labels (vertical and horizontal)
- Shape indicated on PDF template but NOT on Word template
- Please note that the margins for this label size – particularly when using the bleed templates – are very narrow and may fall outside the printable area of some standard printers, which will prevent the printing of borders and/or coloured backgrounds. If your printer cannot print the full area of these labels, you will need to ensure your design does not use the area that your printer cannot print.
Please Note:
These templates are provided in good faith for our customers to use free of charge. Customers should test the suitability of these templates for their requirements (including compatibility with their software/hardware), and are responsible for making any necessary adjustments to achieve the best possible alignment.All products are manufactured with a tolerance, which is an allowable deviation from the measurements stated on the goods (for example, an A4 sheet may have a tolerance of +/- 2mm); this tolerance can lead to slight variation in the measurements of label products and so we recommend that customers complete a test print of any template before printing onto their label products so that they may determine if the template requires any further adjustments.
^ Our labels are very close in size/layout to the alternative codes provided (to within +/- 1mm)