Label Planet
Label Templates For LP35/35R
- LP Code:
- Label Templates LP35/35R
Free Word Templates & PDF Templates for printing A4 sheets of self adhesive labels. Use the links below to download a template for your round labels; all of our label templates have been tested to ensure that they are accurate and compatible with our labels, so you can print your labels quickly, easily, and trouble free!
Information About This Label Size:
Number Across
5
Label Width
35mm (diameter)
Label Height
35mm (diameter)
Horizontal Pitch
39mm
Vertical Pitch
38mm
Number Down
7
Top Margin
17mm
Bottom Margin
17mm
Left Margin
9.5mm
Right Margin
9.5mm
Also Known As
SL35R, AAC035, C350, FC35
Download LP35/35R Label Templates:
- Circles
- Centralised layout
- Selvedge present
- Bleed of 1.5mm (alternative: 1.45mm) possible
- Feed direction not indicated
- Gaps between labels (vertical and horizontal)
- Shape indicated on PDF template but NOT on Word template
- Please note that this label size is sometimes manufactured with a vertical pitch that is less than 38mm.
- If you find that your design is printing out slightly too big for your labels (i.e. the bottom of your printed template finishes just below the bottom edge of the last label on the sheet), you may wish to try using our alternative templates (these templates are set up with a vertical pitch of 37.9mm). If you wish to make your own adjustments to the template you are using, remember you will also need to adjust the top margin to accommodate for using the smaller vertical pitch.
Products Available In Template Size LP35/35R
Please Note:
These templates are provided in good faith for our customers to use free of charge. Customers should test the suitability of these templates for their requirements (including compatibility with their software/hardware), and are responsible for making any necessary adjustments to achieve the best possible alignment.All products are manufactured with a tolerance, which is an allowable deviation from the measurements stated on the goods (for example, an A4 sheet may have a tolerance of +/- 2mm); this tolerance can lead to slight variation in the measurements of label products and so we recommend that customers complete a test print of any template before printing onto their label products so that they may determine if the template requires any further adjustments.
^ Our labels are very close in size/layout to the alternative codes provided (to within +/- 1mm)