Label Planet
View Prices
25 Sheet Minimum Order
Paper Labels, 4 White Labels Per Sheet, 192 x 62mm, LP4/192
Label Templates For LP4/192
- LP Code:
- Label Templates LP4/192
Free Word Templates & PDF Templates for printing A4 sheets of self adhesive labels. Use the links below to download a template for your A4 labels; all of our label templates have been tested to ensure that they are accurate and compatible with our labels, so you can print your labels quickly, easily, and trouble free!
View All Label Templates For
Rectangular Labels With Rounded Corners // Special Use Labels
Information About This Label Size:
Number Across
1
Label Width
192mm
Label Height
62mm
Horizontal Pitch
192mm
Vertical Pitch
62mm
Number Down
4
Top Margin
24.5mm
Bottom Margin
24.5mm
Left Margin
9mm
Right Margin
9mm
Also Known As
SL4
Download LP4/192 Label Templates:
| File Type | Description | |
|---|---|---|
| Word | LP4/192 Portrait | |
| Word | LP4/192 Landscape | |
| LP4/192 Portrait | ||
| LP4/192 Landscape |
- Lever Arch File Labels – rectangles with rounded corners
- Centralised layout
- Selvedge present
- Bleed not possible
- Feed direction not indicated
- No gaps between labels
Please Note:
These templates are provided in good faith for our customers to use free of charge. Customers should test the suitability of these templates for their requirements (including compatibility with their software/hardware), and are responsible for making any necessary adjustments to achieve the best possible alignment.All products are manufactured with a tolerance, which is an allowable deviation from the measurements stated on the goods (for example, an A4 sheet may have a tolerance of +/- 2mm); this tolerance can lead to slight variation in the measurements of label products and so we recommend that customers complete a test print of any template before printing onto their label products so that they may determine if the template requires any further adjustments.
^ Our labels are very close in size/layout to the alternative codes provided (to within +/- 1mm)