Label Planet
Label Templates For LP14/63
- LP Code:
- Label Templates LP14/63
Free Word Templates & PDF Templates for printing A4 sheets of self adhesive labels. Use the links below to download a template for your A4 labels; all of our label templates have been tested to ensure that they are accurate and compatible with our labels, so you can print your labels quickly, easily, and trouble free!
View All Label Templates For
Rectangular Labels With Rounded Corners // Special Use Labels
Information About This Label Size:
Number Across
2
Label Width
63.5mm / 135mm
Label Height
38mm
Horizontal Pitch
66mm
Vertical Pitch
38mm
Number Down
7
Top Margin
15.5mm
Bottom Margin
15.5mm
Left Margin
4.5mm
Right Margin
4.5mm
Also Known As
XSS5102
Download LP14/63 Label Templates:
- Smartstamp “All In One” Labels – rectangles with rounded corners
- Centralised layout
- Selvedge present
- Bleed not possible
- Feed direction indicated (by label layout)
- Gaps between labels (horizontal only)
- Please note that this label size is sometimes manufactured with a label height that is more than 38mm.
- If you find that your design is printing out slightly too small for your labels (i.e. the bottom of your printed template finishes just above the bottom edge of the last label on the sheet), you may want to try using our templates with extra height (these templates are set up with a label height of 38.1mm). If you wish to make your own adjustments to the template you are using, remember you will also need to adjust the top margin to accommodate for using the larger label height. If you are working in landscape the height becomes the width; so if your design doesn’t start at the left edge of the first label in each row and end at the right edge of the last label in each row, you may need to try using the “extra” template. If you make your own adjustments, you need to remember to alter the side margins.
Products Available In Template Size LP14/63
Please Note:
These templates are provided in good faith for our customers to use free of charge. Customers should test the suitability of these templates for their requirements (including compatibility with their software/hardware), and are responsible for making any necessary adjustments to achieve the best possible alignment.All products are manufactured with a tolerance, which is an allowable deviation from the measurements stated on the goods (for example, an A4 sheet may have a tolerance of +/- 2mm); this tolerance can lead to slight variation in the measurements of label products and so we recommend that customers complete a test print of any template before printing onto their label products so that they may determine if the template requires any further adjustments.
^ Our labels are very close in size/layout to the alternative codes provided (to within +/- 1mm)