Label Planet
Label Templates For LP27/70S
- LP Code:
- Label Templates LP27/70S
Free Word Templates & PDF Templates for printing A4 sheets of self adhesive labels. Use the links below to download a template for your A4 labels; all of our label templates have been tested to ensure that they are accurate and compatible with our labels, so you can print your labels quickly, easily, and trouble free!
View All Label Templates For Rectangular Labels With Square Cut Corners
Information About This Label Size:
Number Across
3
Label Width
70mm
Label Height
31.95mm
Horizontal Pitch
70mm
Vertical Pitch
31.95mm
Number Down
9
Top Margin
4.725mm
Bottom Margin
4.725mm
Left Margin
0mm
Right Margin
0mm
Also Known As
EL27S
Download LP27/70S Label Templates:
| File Type | Description | |
|---|---|---|
| Word | LP27/70S Portrait | |
| Word | LP27/70S Landscape | |
| LP27/70S Portrait | ||
| LP27/70S Landscape |
- Rectangles with square cut corners
- Centralised layout
- Selvedge present
- Bleed not possible
- Feed direction not indicated
- No gaps between labels
- These labels go all the way to the edge of the sheet; only printers with an “Edge-To-Edge” printing capability will be able to print the full area of each label. If you do not have access to such a printer, you will need to ensure your design does not use the area that your printer cannot print.
- Please note that Word does not allow measurements of 2 decimal places when working in mm. Our template is set up with a label height of 31.9mm.
- If you find that your design is printing out slightly too small for your labels (i.e. the bottom of your printed template finishes just above the bottom edge of the last label on the sheet), you may wish to try adjusting the label height to 32mm. You will also need to reduce the top margin to accommodate for using the larger label height. If you are working in landscape the height becomes the width; so if your design doesn’t start at the left edge of the first label in each row and end at the right edge of the last label in each row, you may need to try using 32mm as the label width. Remember, you will also need to alter the side margins.
Products Available In Template Size LP27/70S
Please Note:
These templates are provided in good faith for our customers to use free of charge. Customers should test the suitability of these templates for their requirements (including compatibility with their software/hardware), and are responsible for making any necessary adjustments to achieve the best possible alignment.All products are manufactured with a tolerance, which is an allowable deviation from the measurements stated on the goods (for example, an A4 sheet may have a tolerance of +/- 2mm); this tolerance can lead to slight variation in the measurements of label products and so we recommend that customers complete a test print of any template before printing onto their label products so that they may determine if the template requires any further adjustments.
^ Our labels are very close in size/layout to the alternative codes provided (to within +/- 1mm)